欢迎您来到中检集团南方电子产品测试(深圳)有限公司!

Lab Introduction

CCIC-SET owns the largest EMC testing laboratory in South China. The lab has the state-of-the-art equipment and can test according to most national and international standards in this field, making it a top-level EMC testing body even compared with those in developed countries. It enjoys wide recognition and has substantial influence in the industry. 

Our EMC lab holds accreditations by CNAS and various authoritative organizations widely recognized in China and abroad. We provide EMC test as required by 3C certification, voluntary certification, supervision and random checking, and manufacturing license to six product categories such as IT, AV, and communication; certification of CE, E-Mark (EU), FCC (US), VCCI (Japan), C-Tick (Australia and New Zealand); test of electronics, electrical, and related products based on GB, GJB, IEC, CISPR, EN, FCC, VCCI and other relevant standards; design verification, pre-compliance test and rectification test demanded by manufacturers. 

Lab Exhibition

Lab Configuration

Equipment of EMC laboratory

High grade radiated immunity testing system manufactured by American AR

CCIC-SET invested heavily to equip itself with a high grade radiated immunity testing system manufactured by American AR. With field strength up to 200V/M and frequency extended from 100kHz to 8GHz, the system is able to fulfill testing of automotive electronics product and security product according to the latest version of EN61000-4-3 standard.


40GHz spectrometer, 8GHz high-end network analyzer, 40GHz high frequency horn antenna and related pre-amp and filter bank

They can meet the RF testing requirements of FCC and CTA


Three-phase harmonic test system, EFT 4.5KV, lightning surge test 10KV, ringing wave and damped oscillation wave 6KV

The laboratory has test capabilities of three-phase harmonic test system, EFT 4.5KV, lightning surge test 10KV, ringing wave and damped oscillation wave 6KV. It is also equipped with three-phase network. Both single-phase and three-phase equipments can meet the A and B level requirements of ANSI C62.41 / IEEE C62.41 as well as individual requirements of manufacturers.


CMW500 LTE 4G radio comprehensive measurement instrument, UPL multifunctional audio analyzer, a full set of artificial head, mouth and ear

CCIC-SET has the largest testing laboratory for celluar phone terminal products in South China, capable of conducting all EMC test items for 2G/3G/4G celluar phones.


A 10M chamber, a 5M chamber, a 3M chamber and an OTA chamber

The chambers all meet the requirements of ANSI C63.4, EN50147, CISPR16 and GB/T6113 and hold calibration certificates issued by China Institute of Metrology. In particular, the 10M chamber and 5M chamber are specially equipped with three-phase five-wire system. Each phase has > 250A power supply system and 250A filter (each of the three phases 250A). They are the sole 10M chamber/ 5M chamber in China able to test 10M and 5M radiated emission of equipment characterized with large size and large current. 


High grade radiated immunity testing system manufactured by American AR

CCIC-SET invested heavily to equip itself with a high grade radiated immunity testing system manufactured by American AR. With field strength up to 200V/M and frequency extended from 100kHz to 8GHz, the system is able to fulfill testing of automotive electronics product and security product according to the latest version of EN61000-4-3 standard.


40GHz spectrometer, 8GHz high-end network analyzer, 40GHz high frequency horn antenna and related pre-amp and filter bank

They can meet the RF testing requirements of FCC and CTA.


CMU200 GSM, CDMA simulate base station, *UPL multifunctional audio analyzer, * a full set of artificial head, mouth and ear

CCIC-SET is the sole laboratory in South China which relies on only its own capabilities to conduct EMC test of mobile user terminals – simulation mobile telephone, GSM digital digital cellular mobile station (cellphones and other terminal devices), and CDMA digital digital cellular mobile station (cellphones and other terminal devices).


A 10M chamber, a 5M chamber and a 3M chamber

The three chambers all meet the requirements of ANSI C63.4, EN50147, CISPR16 and GB/T6113 and hold calibration certificates issued by China Institute of Metrology. In particular, the 10M chamber and 5M chamber are specially equipped with three-phase five-wire system. Each phase has > 250A power supply system and 250A filter. They are the sole 10M chamber/ 5M chamber in China able to test radiated emission of equipment characterized with large size and large current. 


CCIC-SET EMC chambers’ test capabilities cover the following items: 

Test Item

Test Ability

Radiated Emission 

9KHz~40GHz

AC Line Conducted Emission

9kHz-108MHz

Disturbance Power   

30MHz-300MHz

Insert loss    

      150kHz-1605kHz

Radiated Emission 

9KHz-30MHz

Harmonic & Flicker

      0~440VAC 50/60Hz

EMF  

0EN 50366

ESD        

30kV

RS    

10KMHz~8.0GHz, 200V/m

EFT 

 4kV

SURGE        

10KV

CS

10kHz~400MHz

PFMF     

1~100A/m

DIP                      

      100~270VAC 50/60Hz , 0~16A

oscillatory wave

2.5KV

ringing wave

6KV

noise immunity of automotive electronics          

ISO 7637

maximum sound pressure

      EN50322


Standards include:

N0.   

Item

contents

1

GB  GB/T

GB4824 GB14023 GB4343.1 GB4343.2 GB17743 GB9254 GB17799系列 GB7260.2 GB13837 GB14023

GB15707 GB8702 GB 9175 GB/T17618 GB/T17619 GB/T18655 GB17625.1 GB17625.2 GB/T17626系列

GB/T 9383 GB/T 18387 GB/T21437.2 GB/T 19951 GB 21288 GB19483 GB19484.1 GB22450.1

2

CISPR

CISPR11 CISPR12 CISPR13 CISPR14-1 CISPR14-2 CISPR15 CISPR 16 CISPR22 CISPR24 CISPR25

3

EN

EN300 220-2 EN300 220-1 EN300 330-2 EN300 330-1 EN300 440-2 EN300 440-1 EN300 328

En300 422 EN301 357-2 EN301 357-1 EN300 086 EN300 511 EN301 489-1 EN301 489-3 EN301

489-4 EN301 489-7 EN301 489-9 EN301 489-17 EN301 489-23 EN 50366 EN55011 EN55012

EN55013 EN55014-1 EN55014-2 EN55015 EN61547 EN55022 EN55024 EN 55025 EN 61000-6-1

EN 61000-6-2 EN 61000-6-3 EN 61000-6-4 EN 15194 EN 60601-1-2 EN 60945 EN 60947-1

EN 50130-4 EN 61204-3 EN 62040-2 EN 61326-1 EN 61326-2-1/2/3/4/5/6 EN 50131-3-2 EN

12015 EN 12016 EN 13309 EN ISO 14982 EN61000-3-2 EN61000-3-3 EN 61000-4-2

EN61000-4-3 EN61000-4-4 EN61000-4-5 EN61000-4-6 EN61000-4-8 EN61000-4-9 EN61000-4-11

4

AS/NZS

AS/NZS 4268 AS/NZS CISPR14.1 AS/NZS CISPR13 AS/NZS CISPR15 AS/NZS CISPR22 AS/NZS 4251.1

AS/NZS 4251.2

5

FCC

FCC PART15 FCC PART18 FCC PART22 FCC PART24 FCC PART90 FCC PART95

6

IC

RSS 210 RSS Gen

7

E/e Mark

ECE Reg.No.10, 2004-104-EC

8

SRRC

Xinbuwu No. [2002]353, Xinbuwu No. [2005]423, Xinbuwu No.[2002]277, Xinbuwu No.[2008]44(5) and other technical specifications released by the Radio Administration Bureau of MIIT

9

Other

RTCA/D0-160


CCIC-SET EMC laboratory provides technical services as below:

 CCC certification type test

 CQC voluntary certification type test

Cell phone, communication, RF, and blue tooth products testing

Automotive electronics testing

Energy efficiency label testing

Medical devices and industrial products testing

LED lighting products, lamps and small household appliances testing